• Home
  • Radiation Alert Inspector by SE International – USED


Out of stock

SKU: 252024321 Product Type: Vendor:

Internal Pancake G-M Survey Meter and Scaler

The INSPECTOR radiation survey meter has an internal GM detector and is microprocessor controlled. The Inspector Survey Meter is a general purpose Geiger counter for low levels of alpha, beta, gamma and x-rays. The digital readout, red count light and audible beep, provide instant indications of the radiation level. Other benefits include scaler function with an adjustable timer and external calibration controls. 

General Use includes: Emergency response personnel, Laboratory technician, Industrial, X-ray technician, Radiographer, Industrial hygienist,  Safety manager, Equipment service & maintenance technician, Radiation safety officer, General public, and Geologist.

Common Applications include: Gross wipe counting, Surveying for NORM* contamination,  contamination surveys of packages, equipment, people, etc., regulatory inspections, low energy radio nuclide detection

* Naturally Occurring Radioactive Material

Specifications Inspector+ (Internal tube): Halogen-quenched, uncompensated GM tube with thin mica window, 1.4-2.0 mg/cm2 area density.
Effective diameter of window is 45 mm (1.75 in.).
Radiation symbol on front label marks the center of the detector.
Display 4 digit liquid crystal display with indicators.
Averaging Periods Display will update every 3 seconds. At low background levels, the update is the moving average for the past 30-second time period. The timed period for the moving average decreases as the radiation level increases
Operating Range
mR/hr – 0.001 (1µR) to 100 mR/hr
µSv/hr – 0.01 to 1000
CPM – 0 to 350,000
CPS – 0 to 5000
Total/ Timer – 1 to 9,999,000 counts
mR/hr ±10% typical (NIST), ±15% max – 0 to 100
µSv/hr ±10% typical (NIST), ±15% max – 01 – 1000
CPM ±10% typical (NIST), ±15% max – 0 to 350,000
(Referenced to Cs-137)
Alert Set Range mR/hr 0.001 – 50 and CPM 1 – 160,000
Gamma Sensitivity 3500 CPM/mR/hr referenced to Cs-137. Smallest detectable level for I-125 is 0.02 µCi at contact.
Timer Can set 1 minute sampling periods from 1 to 10 min
Count Light Red LED flashes with each radiation event.
Audio Indicator Internally mounted beeper (can be switched off for silent operation)
Outputs Dual miniature jack drives CMOS or TTL devices: count to computer or data logger. Sub mini jack input allows for electronic calibration
Anti-Saturation Meter will hold at full scale in fields as high as 100 times the maximum reading.
Power Requirements One 9-volt alkaline battery. Battery life is 2160 hours at normal background.
Temperature Range -10ºC to 50ºC (14ºF to 122ºF)
Weight Inspector: 301.4 grams (10.6 oz.) without battery.
Size 150 x 80 x 30 mm (5.9 x 3.3 x 1.2 in.). X

Additional information

Weight 5 lbs