• Home
  • Ludlum Model 375/1 Digital Wall-Mount Area Monitor

$3,135.00 $1,500.00

2 in stock

SKU: 214772029-2-1 Product Type: , Vendor:

From the manufacturer’s website:

Affordable Area Monitor
Range: 0.1 to 9999 µR/hr
Compact, Integrated Design
Low Background Sensitivity
Audio & Visual Alarms
Networkable (Requires Ethernet or Webpage Interface Option)

The Model 375/1 Digital Wall-Mount Area Monitor is designed for visibility and ease of use. This monitor incorporates an internally housed 18 mm CsI scintillator with a sensitivity of approximately 120 cpm per µR/hr. It features a wall-mount chassis and a four-digit LED display that is readable from 9 meters (30 feet) away. Backlit indicators warn of low radiation (yellow), high radiation (red), instrument failure (red), and low battery (yellow), along with an alarm. A green status light indicates the instrument is functioning properly.

Parameters are protected under a calibration cover that provide access to adjusting the calibration constant, dead time correction, and alarm point parameters. Parameters are stored in non-volatile memory (retained even with power disconnected). A five-decade logarithmic analog output is provided.

Options available include remote displays, an Ethernet port, alarm relay output, and a NEMA 4 outdoor enclosure.

Note: While the detector used in this instrument is sensitive and is often used for detection of near-background levels of radiation, its nonlinear energy response means that does and exposure measurements may be over/underreported.

Detector 18 mm CsI detector (nonlinear energy response, see Energy Response Curve in the Graphs tab)
Sensitivity 120 cpm per µR/hr
Measurement Range 0.1 to 9999 µR/hr (alternately 0.01 to 99.99 mR/hr)
Display 4-digit LED display with 2 cm (0.8 in.) characters
Display Units µR/hr (other units available upon request)
Status Indicators
  • Instrument Status: Green light indicates instrument is functioning properly
  • Low Alarm: Yellow light and slow beep (1/sec) audible tone (can be set at any point from 0.0 to 9999)
  • High Alarm: Red light and fast beep (4/sec) audible tone (can be set at any point from 0.0 to 9999)
  • Overload: Senses detector saturation (indicated by display reading “-OL-”)
  • Overrange: Indicates radiation field being measured has exceeded counting range of instrument
Audio Intensity can vary from approximately 68 dB to 100 dB through operation of the external rotary baffle and the internal voltage connection. Frequency is approximately 3 kHz
Temperature Range -20 to 50 °C (-4 to 122 °F)
Power 9 Vdc wall-mount adapter handles any mains voltage in the world, supplied with four sets of prongs for almost any style wall receptacle
Battery Life 48 hours in non-alarm condition (typical)
12 hours in alarm condition (typical)
Battery Charger Battery is continuously trickle charged when instrument is connected to line power and turned on
Construction Aluminum housing with ivory powder coat
Size (H x W x L) 18.7 x 24.6 x 6.4 cm (7.4 x 9.7 x 2.5 in.)
Weight 2.1 kg (4.7 lb)

For internal use:

Barcodes: 18452536 & 18452537

Additional information

Weight 7 lbs
Dimensions 12 × 12 × 12 in