• Home
  • F&J HIGH VOLUME AIR SAMPLER MODEL HV-1
Sale!

$1,000.00 $500.00

SPECIFICATIONS:
PUMP TYPE:
Two-stage, dual ball-bearing, bypass type with an
independent cooling system for the motor that provides
thermal overload protection.
MAXIMUM CAPACITY:
94 CFM at 29.92” Hg and 68ºF (Free Air Flow)
TEMPERATURE OPERATING RANGE:
18 to 122ºF (-7 to 50ºC)
ULTIMATE VACUUM:
80” H2O at standard temperature, pressure and zero flow
restriction
POWER REQUIREMENTS:
110 – 120VAC; 50/60Hz at 6 amperes; single phase
FUSE PROTECTION: 8 amperes, slow blow fuse
HANDLE: Durable plastic
BASE PLATE:
Weight: 1 lb. (0,5 kg)
Dimensions: 7”L × 7”W × 1/8” Thick
(17,8 × 17,8 × 0,3 cm)
DIMENSIONS:
9 ¼”L × 8 ¼”W × 10”H (23,5 × 21,0 × 25,4 cm)
WEIGHT: Approximately 11 lbs. (5 kg)
FLOW METER:
Various flow ranges are available in CFM and LPM.
FLOW CALIBRATION:
An adjustable needle valve at the top of the flowmeter is
secured by a locking nut.
STANDARD COMBINATION FILTER HOLDERS
AVAILABLE:
FILTER
HOLDER
MODEL
CHARCOAL
CARTRIDGE
DIMENSIONS
PARTICULATE
PAPER
DIAMETER
FJ-19P F&J Model C 2” or 50 mm
FJ-27P F&J Model B 2” or 50 mm
FJ-34P F&J Model C 47 mm
FJ-39P F&J Model B 47 mm
FJ-52P F&J Model M 2” or 50 mm
FJ-54P F&J Model M 47 mm

1 in stock

Product Type: Vendor:

This unit runs on battery cables only.  Bench tested to work.

GENERAL DESCRIPTION: (comes with air sampler head)
Model HV-1 (single rotometer) is a high volume air sampler. This model features electronic flow
regulation, a motor cooling fan within the motor housing, flow measurement and flow calibration
capability. The pump is mounted on a rigid base with non-skid rubber feet. A removable controller
module unit includes a protective guard for the single rotometer and the controls. This removable
module facilitates maintenance of the pump components.

NOTABLE FEATURES:

Single RotometerMultiple Reinforcement for the Electrical Cord
Stable Base Plate
Removable Controller Module to Facilitate Maintenance
Multiple Rotometer Scales are Available
Flow Adjustment via Motor Speed Control
Dual Ball bearing Motor with Independent Cooling
110 – 120VAC, 50/60Hz; single phase

 

 

Additional information

Weight 15 lbs
Dimensions 16 × 16 × 16 in